INSTRUMENTATION VALVES
Bar stock needle valves
Inoxmecc Valves&Fittings Instrumentation Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches. The standard types are equipped with a bleed screw. A diverse range of options and the relevant accessories are available.
Features:
- Bar stock with outside screwed bonnet
- Connection: 180°
- Threaded and socket welding
- Nominal operating pressure: 6,000 psi (413 bar) - 10,000 psi (689 bar)
- Packing material PTFE / GRAPHOIL
Bar stock manifolds
Inoxmecc Valves&Fittings oer a variety of 2-3 and 5 valve instruments manifolds in direct and remote mount style with vent
Features:
- Bar stock with outside screwed bonnet
- Connection: 90° - 180°
- Threaded, socket welding and flanged
- Nominal operating pressure: 6,000 psi (413 bar) - 10,000 psi (689 bar)
- Packing material PTFE / GRAPHOIL
- Temperature up to 500°C
- From 1/4” to 1”
- Standard material 316/316LL
- Other material on request
Check valves
The check valves are used to avoid contamination inthe purge systems or to protect the measuring and controlling instruments
Features:
- Bar stock body
- Connection: 180°
- From ¼” to 1”
- Stainless steel spring
- Nominal operating pressure: 6,000 psi (413 bar) - 10,000 psi (689 bar)
- PTFE / VITON seal ring
- From 1/4” to 1”
- Standard material 316/316L
- Other material on request
Instruments ball valves
Inoxmecc Valves&Fittings three piece simple ball valve is designed to provide higher strength and integrity by using the same dynamic multi-ring gland system as in the needle valves, which when combined with the anti-blowout back seating stem, guarantees resistance to many perating processes and pressures.
Features:
- Rating 6.000 psi (414 bar) or 10.000 psi (689 bar)
- PEEK packing standard
- Temperature rating from -40°C / +260°C (104°F / + 500°F)
- Standard material 316/316L
- Connections from 1/4” to 1”
- Locking Device option also available
Monoflanges
For direct and close mounting to the flange connection of process isolating valves on horizontal and vertical pipe lines.Compact
block, block and bleed, double block and bleed
Features:
- ANSI B16.5 flanges from 1/2” to 2“
- Instrument connections 1/2” NPT ANSI B1.20.1
- Drain connection 1/4” NPT ANSI B1.20.1
- Rating from 150 lbs to 2500 lbs
- Standard material 316/316L
- Other material on request
Double Block & Bleed Valves
Inoxmecc Valves&Fittings instrumentation products provide the ultimate suitable solutions for an integral block & bleed valve, which consists of one piece forged body. It provides lots of benefits, featuring a choise of end connections, body style and valve type.
Features:
- ANSI B16.5 flanged from 1/2” to 2”
- Instrument connections 1/2” NPT ANSI B1.20.1
- Drain connection 1/2” NPT ANSI B1.20.1
- Rating from 150 lbs to 2500 lbs
- Standard material 316/316L
- Other material on request